Shopping Cart
0 items
 

KK Plus V5.5e Multicopter controller

KK Plus V5.5e Multicopter controller
Click to enlarge
Price: SGD 60.00
Availability: In Stock
Model: KKPlus V5.5e
Average Rating: 5 out of 5 Stars!

Available Options:
LCD Module for XXController/MEMS firmware:
Flash Firmware Option: :
USB Linker for KK Plus upgrade (Recommended): :
Nylon Standoff offer (More discount now): :
Male to Male RX cable: :
MEMS Module Bundle: :

The price includes:

1 x Fully assembled and soldered board with 3 Piezo Gryo ready to use (All Pre-loaded with Bootloader for easy firmware upgrade)

Recommended option purchase: MKUSB or the USB Serial linker for easy firmware upgarde. (Why Bootloader: with bootloader and the KK Plus Flashtool, changing of firmware (Hex File) is much safer as you are not doing direct programming. This will prevent the wrong setting of flashing that could turn your KK board to a brick!). Please note the 5.5e are w/o the switch, ignore the message of switch from the video demo and from the flashtool.

Board Dimension: 60mm x 60mm

Mounting hole distance: 45mm

Features:

Support standard KK firmware (With Atmel 168 MCU)
Full 6 motor connection with or without LCD module plug in (with XXControl 1.5d/e firmware)
Low voltage alarm (LVA) support, new 5.5e with integrated LED driver to driver upto 400mA 12V LED Strip (you can download the sample C source that you can add on to your own code) Today the code from Mike Barton (XXControler) and David (NextCopter) already supported with LVA
Intergrated Power Distribution board, now you can have better cable management (Typical 30A)
Ready port for optional 5V supply using 7805/Recom for Opto ESC
Support LCD Module for tuning and setup (Great work from Mike to enable PC-less and pot-less tuning)
Enhanced with upgrade ports for DIY upgrade option: 
- MEMs Module (MEMS Gyro, Acc)
- Future module (TBA)
- Variable Pot for easy tuning of VRef so you can use the Gyro of your choice or use the MEMS Module 
- Ready with 3V supply to support your DIY add-on sensor
Bootloader for easy firmware flash (You can download it from the download page now!) Video demo on how to flash the firmware is here with the MKUSB or any serial adaptor)
 
Preloaded with Quad + XXControl V1.5 (need to work with LCD Module to display the setup options). Optional to flash the firmware of your choice with a small fee: please choose from the option menu. Credits to Rolf R Bakke, Mike Barton, MinSoo and many others that contribute to the KK firmware (Firmware is from the 3rd party developer, we cannot guarantee its performance, please test it with care and refer to forum if you need further information)

Notes:

The default firmware (XXControl) needs LCD module to display the configuration/setup as it disable the pots. If you dont have the LCD module or you are not planning to get one, please choose the followings if you dont have USB Serial adaptor or AVR Programmer:

1. XXControl_KR 

2. KK firmware

3. Use the Virtual LCD by BlackCat from RCG (you need the Serial Connection)

To Complete a flyable MultiRotor, you need other components like frame, ESC, motor, props and basic electronics skill to setup a full ready to fly model.

Example of build log using KK Plus - Here

Some sample video:

http://www.youtube.com/watch?v=uSgF8Fojf3A&list=UU-MsDZaYioCSLzSrQzvMqCA&index=1&feature=plcp

http://www.youtube.com/watch?v=B6hHrHGnz5U&list=UU-MsDZaYioCSLzSrQzvMqCA&index=3&feature=plcp

http://www.youtube.com/watch?v=B6hHrHGnz5U&list=UU-MsDZaYioCSLzSrQzvMqCA&index=3&feature=plcp

KK Plus with XXControl Y6 (with all the default settings and no tuning done to demonstrate the firmware and hardware capability)

KK Plus Simple Quad (with all the default settings and no tuning done to demonstrate the firmware and hardware capability)

http://www.youtube.com/watch?v=iBOni4h_UwA

http://www.youtube.com/watch?v=ggSwjG2x9b4&feature=player_embedded

http://www.vimeo.com/24279212
http://www.vimeo.com/24280689
http://www.vimeo.com/24282046

 

 

Note: 

We do not guarantee the firmware performance as the board is based on the standard design to support those firmware. Users are expected to understand the firmware capability.




Continue Shopping
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge
KK Plus V5.5e Multicopter controller
Click to enlarge